Uh oh, the fence failed! Are you also tired of watching that wobbly picket or a leaning fence every day you pass by your backyard? Let’s face it: fences are the backbone of your outdoor space, but even the sturdiest ones can suffer wear and tear. If you are here knowing all the pros, you must know a few common fence repair issues as well. From loose boards to rusty hardware, we’ll equip you with the knowledge and easy fixes to get your fence back in tip-top shape. So, grab your toolbox and get ready to become a fence repair superhero!
Top 4 Common Repair Issues and its Solutions
Leaning or Toppled Fences
Is your fence looking a little worse for wear, with posts tilting like a funhouse attraction? Here’s how to fix a leaning fence yourself:
- Dig it Out: Move cautiously around the leaning post, removing filth from the base area.
- Check for Rot: Scour the post for voids or signs of decay, which may be present on its surface. If it is rotten, then hire a specialist.
- Gravel Power: If the post is good, lay a fresh gravel layer at the base for more stability.
- Shoring up: Return the post to its upright position and lock it tightly.
Damaged Fence Boards
Even the strongest boards can take a beating from the elements. Here’s how to fix minor damage yourself:
- Out with the Splinters: Cut off all the rough or broken fragments using the saw and pliers.
- Smooth Sailing: Remove as much of the remaining putty as possible to create a smooth surface, and then sand the area.
- Seal the Deal: Apply a coat of weatherproof sealant to your board to prevent further damage and increase its longevity.
Loose or Broken Fence Post Caps
Those little hats on your fence posts (post caps) are there for a reason – they keep out moisture that can cause rot. Here’s how to deal with loose or broken caps:
- Tighten Up: Loosen the screws or nails that are used to fix the cap and turn them tightly in case they are loose.
- Cap Replacement 101: If the cap is cracked or broken, you should look for a new cap that fits your fence type, vinyl or metal.
- Match Matters: Select a new cap of the same colour or material as the fence or one that complements the existing fence.
- Pro Help When Needed: If the post itself is damaged and needs replacement, you should call a professional for a more serious repair.
Rusty Hardware
Over time, those metal bits and bobs (nails, screws, hinges) can get rusty. Here’s how to banish the rust and keep your hardware sparkling:
- Scrub-A-Dub-Dub: Use the finest grade of sandpaper or wire brush and start rubbing off to eliminate surface rust.
- Fight Back with Rust Remover: Paint with an outdoor rust-inhibiting primer to a home’s exterior.
- Seal the Deal: Finish off with a layer of outdoor paint to give the house more protection when the primer has dried.
- Pro Help for Extensive Damage: If the rust is advanced or the hardware is extensively compromised, it is best to get a professional to replace it.
Partner with MSG Post Hole Diggers for Professional Repairs!
Are you feeling overwhelmed by repairs? Don’t sweat it! Sometimes, even the handiest DIYer needs a professional touch. For extensive fence builders in Brampton, contact today! We offer various repair services and will ensure your fence is back in shape quickly and efficiently. Let the professionals handle the heavy lifting so you can enjoy your beautiful backyard again!